01787 479 914

Pine Panels

Laminated Pine Panels

( PEFC and FSC Certified )
A/B grade Joinery quality, laminated pine panels. These are used predominantly by furniture manufacturers, kitchen manufacturers, builders, and carpenters.

Ideal product for any internal joinery work. By using edge glued boards, you can offer a much wider panel, in various thicknesses, which are very stable, eliminating twists, cupping, or splits.

Grade – edge glued lamellas, 40-55mm in width, all kinds of healthy knots, well balanced pattern, firmly attached black knots, with a maximum diameter of about 15mm. Pith streaks and small amounts of firmly attached pith are permitted, but not exceeding 300mm in length. Knot and resin pocket repairs may be needed. The B face is a slightly lower quality.

Specification L x W x D

3000mm 600mm 18mm
3000mm 550mm 18mm
3000mm 500mm 18mm
3000mm 450mm 18mm
3000mm 400mm 18mm
2400mm 600mm 18mm
2440mm 1220mm 18mm
3000mm 600mm 25mm
3000mm 600mm 27mm
1860mm 950mm 25mm
2420mm 630mm 6mm
2440mm 600mm 9mm
2400mm 600mm 12mm
3000mm 600mm 12mm
2440mm 600mm 15mm

B-Grade pine panels

Lower Grade pine panels, which have been made from the lamellas not suitable for A Grade production.

Grade – made from lamellas rejected from A grade production. Unlimited black, dead knots, and fallen knots. Pith and sap pockets allowed, some end splits may occur.

Specification – will vary from batch to batch. Detailed specifications available on request.

Thickness from 18mm up to 40mm
Widths from 200mm to 1200mm
Lengths from 900mm to 3000mm

Pine table tops

High Grade joinery, made from the best of the raw material. These tops are square edged, and are primarily used for the production of pine tables, although they are also used as kitchen worktops, window board, and many other applications where stable 40mm or 32mm material is required.

Grade – High Furniture Grade – The face contains all kinds of healthy knots, in unlimited quantities. Firmly attached black knots with a maximum diameter of about 10mm. Pith streaks and small amounts of firmly attached pith are permitted, but not exceeding 100mm length. The rear is lower quality.

Specification L x W x D

1530mm 900mm 32mm
1830mm 900mm 32mm
2440mm 900mm 32mm
1520mm 900mm 40mm
1830mm 900mm 40mm
2440mm 900mm 40mm